Maurice Dupont Stimmer M6 User Manual

ENGLISH
Congratulations, you have just acquired a STIMER M6 Amp model, conceived with the same classical
models sound's quality which benefits from modern technological advances.
It's a tube amp 6 watt, Class A, with a vintage sound of the 50s. Completely made by Maurice Dupont
workshop (Cognac, France), point-to-point wiring and handmade, to avoid at most the losses of sound and
keep all the heat of tubes.
Ideal for the studio or to play at home, it will be also very surprising on stage.
Important:
-When turning on the amplifier, wait for 1 minute before activating the STANDBY for the tube to heat. The
tubes will last longer.
-Before any moving or shipping, make sure the tubes are cold. Even if they are solid, the filament are fragile
when hot.
-To turn off : turn off the STANDBY before switching off the amp.
-Never turn on the amplifier without plugging the speakers! Risk of burning the output transformer and
power tubes.
NEVER OPEN THE AMP, THERE IS VERY HIGH VOLTAGES INSIDE WHICH COULD
KILL YOU
Amplis DUPONT Amps
– ADM Sarl – 20, Rue de Port Boutiers – 16100 Boutiers St Trojan (Cognac) France
Tél : 05.45.32.54.10 – Fax : 05.45.35.47.90 – www.dupontamps.com