Summary of Contents for Idview Digital 960H
-
Page 1: Quick Installation Guide
Real-time NETWORK VIDEO RECORDER Quick Installation Guide Visit our website for detailed product spec 12000 Ford Road, Suite 110, Dallas, Texas 75234 Tel: 972-247-1203 Fax: 972-247-1291 www.idview.com... - Page 2 4 /8 CH NETWORK VIDEO RECORDER Quick Installation Guide Packing The package contains the following items: Network video recorder x 1 User manual disc x 1 Power adapter x 1 Power cord x 1 Alarm terminal block x 2 SATA connection cable x3 Hard drive mounting bracket x 6 Screws for mounting hard drive x 12 Screws for mounting bracket x 12...
- Page 3 Connections: Primary connection: 1. Connect the IP cameras to the LAN port through the hub. Power up the IP camera before powering the NVR. 2. Connect at least one proper monitor to the HDMI or VGA output. (Supporting display mode from 1024x768 up to 1920x1080) 3.
- Page 4 First-time use - Full Auto Install Mode When the first time connect IP cameras to the NVR, the NVR will pop up install wizard window. NVR provides Plug and Play feature if user installs NVR in “Full Auto Install” mode. Click “Full Auto Install” and then the NVR will automatically configure IP address of a camera connected by LAN.
-
Page 5: Front Panel
Front Panel The front panel includes: 1. Power button: Power On/Off NVR. 2. IR receiver: Receiver for IR remote. 3. Status indicators: : HDD Indicator turns on when system is accessing hard disk : Alarm indicator turns on when alarm is detected. :: Exception indicator turns on when system exception alert is detected, such as disk full, disk error, no disk, network disconnect, illegal login, disk over temperature, fan fail, network fail, power loss and IP conflict.