RING AUDIO MASTER HORN — JAZZ LOUDSPEAKERS USER MANUAL CONTENT Supply Unpacking About MasterHorn loudspeakers and a subwoofer 3.1. Features 3.2. Description 3.3. Driver 3.4. Subwoofer internal amplifier Positioning Connection of the speakers Running in Care and maintenance Specification 8.1.
• No naked flame sources (i.e. candels) must be placed on the product. • Do not place heavy objects on top of loudspeaker cabinets. • Do not lift or remove the speakers by holding the sphere — hold them by both hands at the cabinets sides.
There is no crossover. A custom made copper cable is used in the internal wiring. Our sistem fulfills active bass horn as inseparable part of the whole completely authentic and peculiar only to Ring Audio. By its construction subwoofer is clasical conical horn. Subwoofer has an internal amplifier and a digital crossover as integral parts of it.
acoustic phase is absolutely correct and this is crucial in the proper positioning of a sound wave. 5. Connection of the speakers MasterHorn speaker has high sensitivity — accordingly it should be connected to an amplifier of low power - tube pure single-ended mode amp or Class A Mosfets ampli- fier are recomended.
RING AUDIO WARRANTY REGISTRATION This registration will entitle you to contact RingAudio for technical support and it is a prerequisite for an eventual warranty claim against RingAudio. Please ask your dealer to fill in this form at the time of the purchase.