Page 1
JBL. For over 50 years, JBL has been involved in every aspect of musical and film recording and reproduction, from live performances to monitoring the recordings you play in your home, car, or office. We’re confident that the chosen will provide every note of enjoyment that you expected –...
90dB 8 ohms 3700Hz 6-1/2" 1" pure titanium 17-3/8 x 9-5/8 x 8-1/4 inches 441 x 245 x 210mm 16 lbs/7.3 kg ARC Center 100Hz – 20kHz 70 watts 89dB 8 ohms 9000Hz 2 x 4-1/2" 2" paper cone 6 x 16 x 6-1/4 inches 152 x 406 x 159mm 9 lbs/4.1 kg...
Speakers and electronics terminals have corresponding (+) and (–) terminals. It is important to connect both speakers identi- cally: (+) on the speaker to (+) on the amplifier and (–) on the speaker to (–) on the amplifier. Wiring “out of phase” results in thin sound, weak bass and a poor stereo image.
Page 5
Bi-Wiring The ARC1000‘s outer connec- tion panel and internal divid- ing network are designed so that separate sets of speaker cable can be attached to th e low-frequency transducer and midrange/high-frequency transducer portions of the Single-Stereo Amplifier Dual-Stereo Amplifier dividing network. This is called bi-wiring.
• Receiver/amplifier is on and a source is playing. • Review proper operation of your receiver/amplifier. If there is no sound coming from one speaker, check the following: • Check the “Balance” control on your receiver/amplifier. • Check all wires and connec- tions between receiver/ amplifier and speakers.