Vision INSTALLATION INSTRUCTIONS: The SV-5200.IR and SV-5200.IR.C are bar-type license plate cameras with a super wide 180° viewing angle and IR night vision. They are easy to install with no drilling required, requiring minimal installation time. This uniquely designed product can be used for any passenger car, SUV and Van.
INSTALLATION MOUNTING: 1. The SV-5200.IR and SV-5200.IR.C Rear Vision Systems use a super wide-angle lens for best all around performance. The Camera will display the full width of most parking spaces up to 8 feet or even wider. 2. These cameras are designed to work best on vehicles that have a license plate located at the center and above the rear bumper.
Page 3
REVERSE (MIRROR) IMAGING: The SV-5200.IR and SV-5200.IR.C Cameras have built-in circuitry to “mirror” the image so objects on the right of vehicle appear on the right and objects on the left appear on the left when looking at a standard monitor. If your existing monitor or in-dash monitor has a reverse camera input where the monitor itself performs the mirror image, then your picture will not be correct.
Page 4
PlateCam™ Rear Vision System. The PlateCam™ is designed as a safety enhancement device and is in no way intended as a replacement for rear-view mirrors, side-view mirrors or physically checking the surroundings when backing a vehicle.