1. Manuals
  2. Brands
  3. AirScape Manuals
  4. Ventilation Hood
  5. CVK-105
  6. Installation and operation manual

AirScape CVK-105 Installation And Operation Manual

Bath ventilation kit
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
INTRODUCTION
Congratulations on your purchase of an AirScape Bath Ventilation Kit! It is designed to move air
quickly and quietly to keep your bathroom fresh and serene. Please take the time to read this
entire manual before proceeding with installation.
CAUTIONS / WARNINGS
• Prior to installation, service, or cleaning of the unit, switch power off at the main circuit panel.
• Installation and wiring must be done in accordance with local codes and standards.
• Do NOT install the switch where it can be reached from a tub or shower.
• For general ventilation use only. Do not use to exhaust hazardous or explosive material or
vapors or use in fire-rated installations.
© 2013
AirScape Inc.
Bath Ventilation Kit
Installation and Operation Manual
CVK-105/210/260 / VK-105/210/260
Page 1

Advertisement

Table of Contents
loading

Related Manuals for AirScape CVK-105

Summary of Contents for AirScape CVK-105

  • Page 1 CVK-105/210/260 / VK-105/210/260 INTRODUCTION Congratulations on your purchase of an AirScape Bath Ventilation Kit! It is designed to move air quickly and quietly to keep your bathroom fresh and serene. Please take the time to read this entire manual before proceeding with installation.

  • Page 2: What's Included

    2qty 6” x 6” x 6” CHOOSING A LOCATION Make these considerations while selecting locations for the components of your AirScape Bath Ventilation Kit. Intake Location(s): • Position the intake(s) above the sources of odor and moisture to be eliminated.

  • Page 3: Installation

    INSTALLATION AirScape Bath Ventilation Kits are designed to be installed quickly and easily. Once all of the fixed components are mounted, they are simply connected using the provided flex-duct and cable ties. Straightforward wiring to the included electronic push-button timer completes the job.

  • Page 4: Operation

    Figure 1. Timer & Fan Wiring OPERATION Once installed, operation of your AirScape Bath Ventilation Kit is as simple as a push of a button. Generally, it is recommended to have a bath fan continue to run for 20 minutes after the conclu- sion of a shower.

  • Page 5: Specifications & Dimensions

    - Check duct runs for kinks. Check backdraft damper direction. Check duct connections to ensure inner coil is not collapsed. Check that fan impeller is spinning freely. CONTACT INFORMATION Phone: 866.448.4187 (8am-5pm PST M-F) Email: experts@airscapefans.com AirScape Inc. 625 Charles Way Medford, OR 97501 © 2013 AirScape Inc.

  • Page 6: Warranty Information

    Replacement products or parts may be new or reconditioned or a comparable version of the defective item. AirScape warrants any replaced product or part for a period of ninety (90) days from shipment, or through the end of the original warranty, whichever is longer.

  • Page 7: Installation Template

    INSTALLATION TEMPLATE Use this scale template to assist with the installation of the plenum(s). Additional copies available at www.airscapefans.com/downloads.php *Note: If printing, double-check the dimensions of printed template before using © 2013 AirScape Inc. Page 7...

This manual is also suitable for:

Cvk-210Cvk-260Vk-105Vk-210Vk-260

Table of Contents