Advertisement
Quick Links
Advertisement
Summary of Contents for Vastar GX300A
- Page 1 MADE IN UK GX300A & GX300R Convectors INVCTAGX3R - Issue 0...
- Page 2 Models Specification GX300A 1.5kw + Thermostat + 24hr Timer + Turbo fan GX300R 2.8kw + Thermostat + 24hr Timer + Turbo fan shelf / ceiling 526 mm min. bracket slot 520 mm min. 3 No. Wall Mounting Brackets floor 9.00 am - 9.30 pm -...
-
Page 3: Positioning The Heater
Vastar Convector Heaters AUS/NZ Models : GX300A & GX300R IMPORTANT : THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE Locate the heater on the top brackets and allow it to hang in place. IMPORTANT SAFETY ADVICE Fit the bottom bracket into the slot in the heater and then fix it to the wall. -
Page 4: Important Notes
2800W Note: On both models turbo boost is only possible on full power operation. Note: there is no cold blow operation on GX300A and GX300R and all heat settings operate under the control of the thermostat. The product complies with the European Safety Standards EN60335-2-30 and the European Standard Electromagnetic Compatibility (EMC)