Summary of Contents for qtxsound QRC12A
- Page 1 QRC active speaker cabinets User Manual 178.745, 178.748 Features: • Lightweight, compact design • 2 separate input channels • Integral 35mm pole-mount • Mic/line level and for channel 1 • Echo effect for mic. channel...
- Page 2 Introduction: Thank you for choosing the QRC series active speaker cabinet. Please read this manual prior to use. The QR active speaker range has been designed to serve many varied applications, delivering clear, powerful sound reinforcement wherever it is needed. Please note: your QRC active speaker cabinet may be supplied with more than 1 IEC or Fig.8 mains lead.
- Page 3 Operation • With VOLUME and GAIN controls turned down and power switch off, connect the IEC mains lead to an appropriate mains outlet. • If a microphone is to be connected directly into the QRC active speaker, connect it to Channel 1 via XLR or 6.3mm jack and select “MIC”...
- Page 4 Check that MIC/LINE switch is not switched to “MIC” for a line Distorted output signal Reduce GAIN control on the relevant channel until signal is clean Check that MIC/LINE switch is not switched to “LINE” for a mic. Microphone output very low signal © QTX Sound 2011...