BURSH CUTTER Instruction Manual Caution : Be sure to read this instruction manual before use. Use the machine only after fully understanding its contents. If you lend the Brush cutter, also lend the manual with it. The operator should only use the equipment after receiving full instructions on safe operation.
Thank you very much for purchasing our brush cutter. Workers in a state forest take rests for safety as follows. Our top priority is customer safety. Before use, please be sure to read this manual which explains safety procedures, assembly of the The maximum consecutive working days are 3 days.
SPECIFICATIONS (with HONDA engine) (Fig$c) $d Turn the throttle wire round from the muffler side. MODEL SBX24W SBX24L SBX26W SBX26L SBX28W SBX28L $e Secure the lead wire/throttle wire to the machine, using the wire band.
INSPECTIONS BEFORE STARTING ENGINE INSPECTION AND MAINTENANCE Fuelÿ 2-cycle engineÿ Inspections and maintenance before each use. Use regular car gasoline mixed with special 2-cycle engine oil as fuel. 1) Cleaning the air cleaner. Mixing ratio (volume ratio) Clean the element with white kerosene. Then soak Gasoline: special 2-cycle engine oil (JASO FE Class) it in engine oil and squeeze it firmly with one hand.
TROUBLESHOOTING Malfunctions Causes Remedies 0û The engine does not start. 0û The machine is not switched on. 0û Switch the machine on. (or is difficult to start.) 0û The fuel tank is empty. 0û Refuel the tank. 0û No enough priming. 0û...