Download Print this page

Volume Control/Variable Q - Dunlop 535Q Owner's Manual

Wah-wah pedal

Advertisement

VOLUME CONTROL
By turning the Volume Control knob located on the left side
of the pedal, you control the amount of gain. Turning the knob
clockwise will increase your gain to up to 16dB.Turning the knob
counter-clockwise will decrease your gain to 0dB, or normal
throughput.
VARIABLE Q
The "Q" adjustment is also located on the left side of the
pedal; you can control the sharpness of the bandpass with this
adjustment. High Q is a very selective bandpass filter, low Q is a
very broad bandpass filter approaching an almost volume like
control. The lower Q settings have more musical quality and
don't effect tone as much as the high Q settings.
The CRYBABY® 535Q Wah Wah pedal uses one 9-volt battery.The battery access is
through the bottom of the pedal.
The 535Q uses the Dunlop ECB03 Adapter (ECB03E for Europe), a 9-volt DC regu-
lated AC adapter. Plug polarity is positive on the barrel and negative in the center.
NOTE: Battery must be installed to operate the 535Q unless an AC adapter is used.
When using a battery, the life of the battery can be greatly extended if you unplug the
input when the effect is not in use for long periods of time.
POWER REQUIREMENTS

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Crybaby 535q