Page 2
UHF Amplifier AMP1-10 UHF Power Amplifier Model AMP1-10 MK2 Overview This amplifier is designed to increase the operating range of an already correctly installed system. In such a system the need for a well sited transmitting aerial should previously have been addressed.
Page 3
UHF Amplifier AMP1-10 UHF Power Amplifier Model AMP1-10 MK2 Installation For the DC powered unit, connect the power lead provided between the transmitter unit and Amplifier module using the 2 pin lockable connectors located on the end chassis plates of the respective units (these are polarised to avoid reverse connection).
Page 4
UHF Amplifier AMP1-10 Mains powered UHF Amplifier: Typical Installation External wall mounted dipole antenna Alternative in-line Installation RG213 or UR67 Coaxial Cable RF Out 'N' Connector (silver plated) ConneXions UHF Amplifier Transmitter DC powered UHF Amplifier: Typical Installation External wall mounted dipole antenna Alternative in-line Installation...