Before Using Your Vhf55S; Installing The Alkaline Batteries Or Charging And Installing The Ni-Mh Battery Pack - Humminbird VHF55S Operation Manual

Humminbird two way vhf handheld radio operations manual
Table of Contents

Advertisement

Priority Scan: Allows you to scan all channels while alternately scanning Channel 16 to make
sure that you don't miss distress or emergency calls.
NOTE: You should record your VHF55S's serial number, which is on the back panel of the radio, here.
Serial Number: ________________________.

BEFORE USING YOUR VHF55S

Before using your VHF55S radio, you should do two things:
1. Install the 6 alkaline batteries or charge and install the battery pack onto the radio.
2. Attach the antenna to the radio.
In addition, you may want to perform the additional optional step:
3. Attach the belt clip to the radio (optional).
1. Installing the Alkaline Batteries or Charging and Installing
the Ni-MH Battery Pack
NOTE: If you are using alkaline batteries, you must make sure you have six fully-charged
batteries.
NOTE: Rotate fastener as shown to remove battery pack from the radio. Lift the battery pack
out and up from the bottom to remove it from the radio.
8 8

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VHF55S and is the answer not in the manual?

Table of Contents

Save PDF