6 ohms. A separate subwoofer is recom- easily with the room décor or other equipment. mended to reproduce the lowest frequencies. In a home theater, the LCR7 is intended for use in the front left, center, and right positions adjacent to the Surround speakers video display.
In a multichannel audio system for a home theater, one loss of clarity and poor imaging. Accordingly, we do not LCR7 should be installed horizontally above or below the recommend placing the LCR7 near a corner unless the video display for the center channel, and two should be side wall is covered with sound-absorptive material.
4. Attach the bracket to the wall with the anchors. resistance rating for the application. Check the local building code for specifi c requirements. Russound offers Connecting the Speaker a two-conductor speaker cable with a Class 3 fi re rating for in-wall installation.
To rotate the badge, The LCR7 comes with two different grilles, one of which simply pull it straight away from the grille and turn it. is attached to the speaker. To remove the grille:...
Connecting the Amplifi er or Receiver Saving your speakers from signal clipping The LCR7 is designed to be driven by an amplifi er or When a source audio signal demands more power than receiver with a rated output of up to 150 watts RMS per the amplifi...
Russound will replace any defective part and correct any defect in workmanship without charge for either parts or labor. Russound may replace returned speakers with a product of equal value and performance. In such cases, some modifi cations to the mounting may be necessary and are not Russound’s responsibility.