TIPTEL 1/8 fax clip Operating Instructions Manual page 55

Programmable parameters
Deleting a SMS extension for CO line 1
1. Pick up the handset of extension
21 .
2. Dial the program code number
19999 .
3. Dial code number 390 .
4. Replace the handset of extension
21 .
Please note that - if necessary - the CO-line ring and the CO-line access have to be re-esta-
blished.
Setting the SMS extension for CO line 2
Example: configuration of extension 22 for a SMS device for external line 2
1. Pick up the handset of extension
21 .
2. Dial the program code number
19999 .
3. Dial the code number 30 n.
n = 1...8: this is the last digit of the
SMS extension.
Example: Dial the code number
302 for extension 22 .
It is important to make sure that only external line 2 is signalled at the selected extension (in
this case: 22) and that only external line 2 provides a CO line for this extension. For the latter,
it is possible, for example, to use the targeted CO-line access with "95" instead of "0".
Otherwise, it is recommended to carry out a clear and unequivocal assignment:
You hear the dial tone of the telephone
system.
You hear the acknowledgement signal.
The connection for the SMS device is
deleted. You hear the acknowledgement
signal.
Programming is terminated.
You hear the dial tone of the telephone
system.
You hear the acknowledgement signal.
The connection for the SMS-device is pro-
grammed. You hear the acknowledgement
signal.
55