TIPTEL 1/8 fax clip Operating Instructions Manual page 48

Programmable parameters
The door opener duration can be set for between 1 and 9 seconds. The telephone system is fac-
tory pre-set for 3 seconds.
To set the door opener duration
1. Pick up the handset from extension
21.
2. Dial the program code number
19999 .
3. Dial the code number for the desi-
red door opener duration according
to the table below, for ex. 65 , for a
time of 5 seconds.
4. Replace the handset.
Door opener time 1 sec.
Code number
2 sec. 3 sec.
61 62 63
You hear the telephone system's dial tone.
You hear the acknowledgement signal.
As confirmation you hear an acknowledge-
ment signal.
The programming is finished.
The door opener will be activated for the
set time when the code number 6 is dial-
led.
4 sec. 5 sec. 6 sec.
64 65
48
7 sec. 8 sec.
66 67 68
9 sec.
69