Doorbell Ring - TIPTEL 1/8 fax clip Operating Instructions Manual

Programmable parameters
The doorbell can be signalled on the extensions, when a door intercom adapter is connected in
the telephone system.
This signal can be switched on and off for every extension.
If the door bell is pressed during a telephone conversation you will hear a call waiting signal.
(That is if the call waiting function is activated.)
To switch the doorbell ring on or off
1. Pick up the handset from extension
21.
2. Dial the program code number
19999 .
3. Dial the code number for the desi-
red doorbell ring status according
to the table below. For ex. 503 , to
deactivate the doorbell ring for
extension 23.
4. Replace the handset.
Telephone
Doorbell ring On
Doorbell ring Off
21 22 23
591 592 593
501 502 503
You hear the telephone system's dial tone.
You hear an acknowledgement signal.
As confirmation you hear an acknowledge-
ment signal.
Extension 3 will not ring when the doorbell
is pressed.
The programming is finished.
24 25
594 595 596
504 505 506
46
26 27 28
597 598
507 508
all
590
500