Transmission Of Clip To Telephones - TIPTEL 1/8 fax clip Operating Instructions Manual

Programmable parameters
Transmission of Clip information to telephones on / off
The transmission of CLIP information can be switched on or off individually for each telephone.
The corresponding activation or deactivation is realised at telephone 21. The programming
codes are indicated in the below-mentioned table. In the default setting, the transmission of
CLIP information is activated for all telephones.
Example: telephone 24 should not receive CLIP information
1. Pick up the handset from extension
21.
2. Dial the program code number
19999 .
3. Dial 364 .
4. Replace the handset.
Now, the transmission of CLIP information has been deactivated for telephone 24.
telephone
CLIP transmission on
CLIP transmission off
21 22 23
351 352 353
361 362 363
44
You hear the telephone system's dial tone.
You hear an acknowledgement signal.
As confirmation you hear an acknowledge-
ment signal.
Telephone 24 will no longer display CLIP
information.
The programming is finished.
24 25 26
354 355 356
364 365 366
27 28 all
357 358 350
367 368 360