Delayed Ringing - TIPTEL 1/8 fax clip Operating Instructions Manual

Delayed ringing

With the delayed ringing function, an incoming external call will first ring on extensions 1 and 2.
Extensions 3 to 8 will ring after 15 seconds. This gives you the opportunity to answer the calls
on the extensions 1 and 2 before the call is forwarded to the extensions 3 to 8.
To switch the delayed ringing function On
1. Pick up the handset from extension
1.
2. Dial the program code number
19999 .
3. Dial 19 .
4. Replace the handset.
To switch the delayed ringing function Off
1. Pick up the handset from extension
1.
2. Dial the program code number
19999 .
3. Dial 10 .
4. Replace the handset.
You hear the telephone system's dial tone.
You hear an acknowledgement signal.
As confirmation you hear an acknowledge-
ment signal.
The delayed ringing function is switched
On. Incoming external calls will ring with a
delay on extensions 3 to 8 15 sec. later.
The programming is finished.
You will hear the telephone system's dial
tone.
You will hear an acknowledgement signal.
As confirmation you will hear an acknow-
ledgement signal.
The delayed ringing function is switched
Off. Incoming external calls will ring on all
extensions at the same time.
The programming is finished.
26