PANEL DESCRIPTION 1. Channel 1 Volume Control 7. Treble Control 2. Channel 2 Volume Control 8. Master Volume Control – Volume control for entire system 3. Channel 3 Volume Control 9. Power Switch 4. Channel 4 Volume Control 10. Power Indicator - LED 5.
This output allows connection of standard low impedance loudspeakers. The minimum impedance must be 4 . When two or more loudspeakers are in use, ensure that they are wired in such a way that the impedance load is between 4 and 16 . QSM-606EP, QSM-612EP and QSM-624EP Technical Specifications Type Mixer Amplifier...
Mute slide switch Mic 1/Aux 1 push switch Mic 2/Aux 2 push switch Mic 3/Aux 3 push switch Mic 4/Aux 4 push switch Mic 5/Aux 5 push switch AC 115V / 230V voltage Selector switch Indicators Power indicator (LED), output level indicators (6 LEDS) AC power consumption 150W 300W...
Page 6
GENERAL INSTALLATION DO NOT run microphone cables near A/C lines, data, telephone or 70V line cables. DO NOT run outputs line cable near data, telephone or other low voltage cables. ENSURE that all loudspeakers are in-phase. ENSURE that there are no short circuits on the loudspeaker line before connecting to the amplifier. IMPORTANT As the colors of the wires in the mains lead of this apparatus The wires in the mains lead are colored...