beier USM-RC-2 Operating Manual page 79

D Sound module USM-RC-2
3. Adjustment of speed steps/gears:
Please set the required speed steps/gears for backwards and forwards in the Sound-
Teacher.
4. Adjustment of thresholds:
If you choose more that one speed step/gear, red lines will occur automatically in the
driving sound diagram to set the thresholds for each sound (FG1-FG5).
5. Adjustment of start and end speed of the play-back speed of driving sounds:
The play-back speed of driving sounds can be adjusted by shifting the blue quadrates
in the diagram and therefore the sounds can be adjusted to the driving speed of the
model.
The play-back speed can be affected by the trimmer P1 as well. Please consider that
the change sounds may not fit exactly to the driving sounds anymore. Thus we
recommend leaving the trimmer in the middle and adjust the sound speed with the
driving sound diagram.
6. Control of driving sounds:
Next you should check if all slots are occupied with the necessary driving sounds. For
example if you like to have three gears for your driving sound you need to use FG1 -
FG3 for your different sounds. Otherwise your sound module might get problems with
finding the different sounds.
03.02.2014 BEIER-Electronic 79