System Set-Up; Setup Mode; Setup Screen (First); Brightness - Acura 2008 RL Navigation System Navigation Manual

Main Menu

Setup Mode

The Setup function consists of two main
screens that allows you to change and
update information in the system. To
display the Setup screens, use the voice
control system and say "Setup" or press
the SET UP button. To change it to
another Setup screen, select MORE in
the upper right corner of the screen.
On any of the Setup screens, you can
use the voice control system to select
any item on the screen.
NOTE:
• If some items appear to be grayed
out, and cannot be selected, it is
because you did not select OK on the
initial Disclaimer screen. See
System Start-up on page 17.
• Setup items in this manual with the
symbol indicate that the display
settings depend on what "Driver #"
was displayed on the MID when the
vehicle was started. See Remote
Keyless Entry Setting on page 18.
• If only "Welcome" is displayed, then
all Setup settings revert to factory
defaults, and all personal data (such
as Address Book or Calendar) are not
available.
• For information on the available
voice commands, see Voice
Command Index on page 152.
2008 RL

System Set-up

Setup Screen (first)

From any screen, say "Setup screen" or
press the SET UP button, and the
following screen appears:

Brightness

The screen brightness has 11 settings.
To change the brightness, use the voice
control system and say "Brightness up"
or "Brightness down." You can also
select Brightness and change the
setting by rotating the Interface Dial
knob.
Tip:
If you are having trouble viewing the
screen in bright lighting conditions, try
increasing the brightness.
Navigation System 83