Selecting The Street - Acura 2008 RDX Navigation Manual

Main Menu
If the system does not find an exact
match, select LIST when you finish
entering the name of the city. Most of
the cities and towns for that state are
listed.
Listings of cities and towns in the non-
detailed coverage area may have an
asterisk "*" next to their names. If you
select one, a pop-up box is displayed
saying; "No detailed street data is
available...", and a street address cannot
be entered (see Map Coverage on
page 117). Try entering the street first,
and then select the city if available.
Select View Dest. Map and use the
Interface Dial to select an icon,
approximate area, or street you wish to
choose as your destination. Otherwise, a
central location of the city will be
selected. If you select a point of interest
(POI) or road in an unverified area, you
may or may not have routing in these
areas. See Map Overview on page 6.

Selecting the Street

By Voice Control:
After you have selected the city, or if
you say "Street" on the Find address
by screen, the display changes to the
Say street name screen. Say the street
name and the searching will begin.
To enter the street name by voice
spelling, say or select CHANGE TO
SPELL MODE on the Say street
name screen, and the display will
change to the Enter street name
screen.
2008 RDX
Entering a Destination
Say the street name by saying individual
letters or numbers, or words that
represent the letters, one at a time.
Navigation System 29