Vector Pro PWA-14 Installation And Assembly Manual

Installation and Assembly - Vector Pro
IMPORTANT! Read entire instruction sheet before you start installation and assembly.
IMPORTANT! Certain types of walls require additional mounting hardware...
• This product was designed and intended to be mounted to the following supporting surfaces checked below with
the hardware included in this product as specified in the installation sheet. To mount this product to an alterna-
tive supporting surface, contact Peerless customer care at 1 800 865-2112.
• This product was designed to be installed on the following wall construction only;
WALL CONSTRUCTION
x Wood Stud
x Wood Beam
Solid Concrete
Cinder Block
Metal Stud
Brick
Other or unsure?
TURN TO THE APPROPRIATE PAGE FOR YOUR INSTALLATION.
Installations:
To Wood Stud Walls.............................................................. step 2, page 3
To Concrete Walls...................................................................step 3, page 4
To Metal Stud Walls.................................................................step 4, page 5
Visit the Peerless Web Site at www.peerlessmounts.com
™
Wall Mounts
WARNING
ADDITIONAL HARDWARE REQUIRED
None
None
Do not attach except with Peerless accessory kit for solid concrete;
Contact Customer Service for Peerless accessory kit for solid concrete.
Do not attach except with Peerless accessory kit for cinder block;
Contact Customer Service for Peerless accessory kit for cinder block.
Do not attach except with Peerless accessory kit for metal studs;
Contact Customer Service for Peerless accessory kit for metal studs.
Contact Customer Service
Contact Customer Service
1 of 6
and PRS Projector
ISSUED: 03-19-03 SHEET #: 017-9011-4 06-13-07
For customer service call 1-800-729-0307 or 708-865-8870.
Models: PWA-14,
PWA-14S,
PWA-14W
Max. Load Capacity
50 lb (22.7 kg)
Some of the following
tools may be required:
Drill, hammer, socket
wrench, pencil, stud finder