American Standard Townsend 0555.104 Features & Dimensions

TOWNSEND PEDESTAL SINK
• Vitreous china
• Turn-of-the-century detailing on lavatory
and pedestal
• Front overflow
• Supplied with mounting kit
• Faucet ledge with large deck area
(faucet not included)
❏ 0555.801 Faucet holes on 203mm (8") centers
(Illustrated)
❏ 0555.401 Faucet holes on 102mm (4") centers
Nominal Dimensions:
619 x 495 x 900mm
(24-3/8" x 19-1/2" x 35-7/16")
❏
0555.108 Lavatory slab-203mm (8") centers
❏
0555.104 Lavatory slab-102mm (4") centers
❏ 734906-401 Pedestal only
Bowl sizes:
489mm (19-1/4") wide,
289mm (11-3/8") front to back,
146mm (5-3/4") deep
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures
To Be Specified:
❏ Color: ❏ White
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
❏ Nipple:
* See faucet section for additional models available
© 2008 AS America Inc.
89mm
(3-1/2)
PEDESTAL ANCHORING
SCREW HOLES
8mm (5/16) DIA.
203mm
(8)
203mm
(8)
*
578mm
(22-3/4)
*
521mm
(20-1/2)
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND "P" TRAPS
ARE SUGGESTED.
▼
PEDESTAL ANCHORING SCREWS NOT INCLUDED.
■ SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST
BE TAKEN FROM FIXTURE.
FITTING NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
J9
TOWNSEND
PEDESTAL SINK
VITREOUS CHINA
FINISHED
203mm
WALL
(8)
212mm
(8-1/2)
495mm
(19-1/2)
619mm
13mm
(24-3/8)
(1/2) DIA.
HOLES FOR
ANCHOR BOLTS
260mm
(10-1/4)
REF.
SUPPLIES AS
178mm
REQUIRED
(7)
1-1/4 O.D.
WASTE
900mm
(35-7/16)
1-1/4 O.D.
TAILPIECE
FINISHED
FLOOR
229mm
(9)
51mm
(2)
PEDESTAL
SIDE SECTION
Revised 2/08