Radio Shack Keychain Stopwatch Owner's Manual

-G[EJCKP"5VQRYCVEJ
YKVJ"%NQEM."6KOGT."9GV"%QORCUU"CPF"6JGTOQOGVGT
63-1126
#
"+/2146#06"
If an icon appears at the end of a paragraph,
go to the box on that page with the
corresponding icon for pertinent information.
Rý
#
— Warning
. . . .
±
— Caution
± ±
"016'"
Setting the Time and Date
• From time display, hold down START/STOP
to review the date. Release START/STOP to
return to the time display.
• You must manually set the date to February
29 in a leap year.
• If you need to set the date back a month, you
must first set the month to the desired
month, then set the date. For example, if the
calendar setting is now April 1 and you want
to set it back to March 31, you must first set
) ) ) )
the month to (March), repeatedly press
SPLIT/RESET until the day digits flash, then
)' )' )' )'
set the date to . You can not set the date to
)' )' )' )' * * * *
when the month is (April) because there
are only 30 days in April.
• The day of the week may not be set during
the initial setting after a power loss. After
setting the time and date, cycle through the
steps again to this point to set the day of the
week.
Turning the Alarm On and Off
The snooze feature allows you to silence the
alarm temporarily. When the alarm sounds,
press START/STOP. The alarm is silenced
and sounds again after five minutes
#
MODE
SPLIT / RESET
— Important
— Note
5'66+0)"6*'"6+/'"
#0&"&#6'
1. From the time display, press
three times. The second digits and the
dash below the left
2. Press
reset to
3. Press
flash.
4. Repeatedly press or hold down
STOP
5. Press
flash.
6. Repeatedly press or hold down
STOP
To choose between 12 and 24-hour
formats, repeatedly press
to advance the hour digit until the
desired format appears.
"
• If you are setting time based on a
12-hour format,
to the minutes when you set the time.
• If you are setting time based on a
24-hour format,
minutes when you set the time. The
range is
7. Press
the day digits flashing.±
8. Repeatedly press or hold down
STOP
appears.
9. Press
flash.
10. Repeatedly press or hold down
STOP
11. Press
currently set day of the week flashes.±
OWNER'S MANUAL — Please read before using this equipment.
START / STOP
COMPASS
MODE
flash.
T
, the second digits
START/STOP
&& && && &&
.
. The minutes digits
SPLIT/RESET
START/
until the desired minutes appear.
. The hours digit(s)
SPLIT/RESET
START/
until the desired hour appears.
START/STOP
7 7 7 7 F F F F
or appears next
> > > >
appears next to the
& & & & () () () ()
to .
:7J; :7J;
:7J; :7J;
. appears with
SPLIT/RESET
START/
until the correct day of the month
. The month digits
SPLIT/RESET
START/
until the correct month appears.
. The dash below the
SPLIT/RESET
©
2002 RadioShack Corporation.
All Rights Reserved.
RadioShack and RadioShack.com are trademarks
used by RadioShack Corporation.
Thank you for purchasing the
RadioShack Keychain Stopwatch. This
handy device also includes a clock,
timer, alarm, wet compass and analog
thermometer.
12. Repeatedly press or hold down
until the correct day of the week
STOP
appears.
13. Press to return to the time
MODE
display.
5'66+0)"6*'"#.#4/"
6+/'
The daily alarm sounds for one minute at the
preset alarm time.
1. From the time display, press
twice. The hour digits and the dash
below flash.
M
2. Repeatedly press or hold down
until the desired hour digits
STOP
appear.
3. Press . The minute digits
SPLIT/RESET
flash.
4. Repeatedly press or hold down
until the desired minutes digits
STOP
appear.
5. Press to store the alarm setting
MODE
and return to the time display.ý ý
appears when the alarm is set.
6. To view the alarm time from time
display, hold down
SPLIT/RESET
Release it to return to the time display.
6 " "#
740+0) 6*' .#4/
"1
#0& ((
1. From the time display, hold down
and
START/STOP SPLIT/RESET
same time. The watch beeps and the
alarm time appears.
2. Release and
START/STOP
to return to the time display.
At the preset alarm time, the watch beeps
for about one minute. To silence the alarm
sooner, press
SPLIT/RESET
START/
MODE
START/
START/
˜
.
"1 "
0
at the
SPLIT/RESET
.±