Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Niles CS120
Summary of Contents for Niles CS120
- Page 1 NILES® INSTALLATION & OPERATION GUIDE CEILING-MOUNT IR MICROSENSOR®...
-
Page 2: Features And Benefits
WS120R and MVC100lR sensors or the IntelliPad®. • Factory tested for pickup range and angle The CS120 is just one part of the three building • Small size of only 1/2" diameter by 2-7/8" blocks necessary to complete a Niles IR repeating... - Page 3 IR signal being able to "bounce" off a wall The CS120 connects to the Niles Infrared main sys- or object to the CS120. The IR pickup angle of the tems unit or IRH61 0 sensor expansion hub with an CS120 is 30°...
- Page 4 AC or heating conduits, etc. manual for specific installation instrutions. 1. Determine a mounting location for the CS120 2. Drill a 11/16" hole where the CS120 will be mounted 3. Run the CS120's IR cable. Label the cable for (Figure 2).
- Page 5 (not supplied) plugged into the switched outlet. Niles stock# FG01035 Figure 1 MSU250 Wiring diagram (installed in an MSU250 system) Power, IR data, status signal and ground CS120 IR sensor via CAT-5 wire 12V+ Black Ground Yellow Data White Status...
- Page 6 Figure 4 Parts guide Removing the bezel (a) Mounting surface (b) IR Cable (10 feet supplied) (c) CS120 Miniature IR Sensor (supplied) (d) Installation screws (supplied) (e) CS120 lens bezel (supplied) 1 = Green/White - 12V 2 = Green - DATA...
-
Page 7: Operation
Operation of the CS120 is straightforward. Simply combine to create a feedback loop are: aim your hand-held remote at the CS120. Your IR command is instantly repeated to your equip- 1. Both a sensor and a flasher are located within ment. -
Page 8: Specifications
Unit With Dome: 1/2" (1.27 em) Diameter x 3" (7.62 em) Long Unit Without Dome: 1/2" (1.27 em) Diameter x 2-7/8" (7.30 em) Long Contents • CS120 Miniature IR Sensor • CS120 Lens Bezel • Installation Screws (3) • Mounting Bracket... -
Page 9: Limited Warranty
INSTRUCTIONS FROM NILES. IF THE ABOVE CONDITIONS ARE MET, THE PURCHASER'S SOLE REMEDY SHALL BE TO RETURN THE PRODUCT TO NILES, IN WHICH CASE NILES WILL REPAIR OR REPLACE, AT ITS SOLE OPTION, THE DEFECTIVE PRODUCT WITHOUT CHARGE FOR PARTS OR LABOR. NILES WILL RETURN A UNIT REPAIRED OR...