UPM SE-11P Owner's Manual

Programmable Digital Timer
SE-11P
Please take the time to read
and understand this manual
ON/OFF
so you can begin to enjoy
the convenience and energy
saving benefits this product
has to offer.
SET CD
!
14 ON settings /
14 OFF settings
!
Programs can be set to
operate on a specific day,
Monday to Friday,
Monday to Saturday,
Saturday and Sunday, or
everyday of the week
!
Countdown timer
!
Random function
!
12/24 hour clock
!
15A, 1800W (resistive);
600W (tungsten)
PAGE 1
PROGRAM DISABLE
This timer allows you to disable any particular program, or if you have more than one
program set, you can disable all of them at once using the
When a program is disabled, the time settings are stored in memory so that when you
re-enable the programs, the timer will resume with the same programs as before.
SINGLE PROGRAM DISABLE
To disable a single program, select the program of choice by using the
1
or key.
NOTE: You will need to disable both the ON and OFF setting of the
program to completely disable that particular program.
EXAMPLE:
You wish to disable PROGRAM 2 only.
2
Press the key
SET
The symbol will appear and the day(s) will be blinking.
Press the key to disable the program. An
3 ON/OFF
indicate that the particular setting has been disabled.
4
Press the SET key 3 times to exit.
PAGE 9
GETTING STARTED
1
ON/OFF
SET
2
RANDOM 3
PROG
R
PM indicator
DST indicator
PROGRAM DISABLE
If this was the ON setting that was disabled, now proceed to disable the OFF setting
master disable function.
of the same program to completely disable that particular program; or if you had
disabled the OFF setting first, now go to the ON setting.
1
Select the OFF setting of the same program by using the
2
Press the
The
Press the
3
indicate that the particular setting has been disabled.
X symbol will appear to
4
Press the
You have now successfully disabled PROGRAM 2.
To re-enable
*
OFF settings. The
been re-enabled (returned to normal).
button placements
6
1
ON/OFF – manual on/off control
RANDOM
2
SET – activates set function
CD PROG
3
CD – activates countdown timer
R
4
5
RESET ( R ) – reset
4
5
– scrolls through selections
6
6
RANDOM – activates random function
7
6
7
LED – lights up when the power is ON
Weekday indicator Program disable
Random Set Clock Countdown Program ON/OFF indicator
PAGE 2
EXAMPLE:
You wish to disable PROGRAM 2 only.
key
SET
symbol will appear and the day(s) will be blinking.
key to disable the program. An X symbol will appear to
ON/OFF
key 3 times to exit.
SET
the particular program, repeat the above steps for the ON and
X symbol will disappear indicating that the program has
PAGE 10

CLOCK SETTING

For proper operation, ensure the clock is set to the correct time.
Before proceeding with the clock setting and programming for the first time,
*
press the RESET (
R
1
2 Press the key to begin the clock setting. The
SET
3
Select the current day using the
4
Press the key
SET
display
5
Select the current hour using the
* To toggle between 12 or 24 hour format, press the
If you are using the 12 hour format and you are setting an afternoon or evening time,
ensure that the PM symbol appears on the left.
6
Time display Press the key
SET
7
Select the current minute using the
8
Press the key
SET
9
Set the seconds to zero by pressing either the
10
Press the key to finish the clock setting
SET
PROGRAM DISABLE
MASTER PROGRAM DISABLE
If you have more than one program set, and you wish to disable
you can do so by using the
or key.
1 To perform the master disable
or key.
2
Press the key
SET
The symbol will appear and the day will be blinking.
Press the key to disable the program. An
3 ON/OFF
indicate that all programs have been disabled.
4
Press the key 4 times to exit.
SET
You have now successfully disabled ALL programs.
To re-enable the programs, repeat the above steps. The
*
disappear indicating that all the programs have been re-enabled (returned to
normal).
) key.
To set the clock, first check to see that the display is
in the clock mode ( ). If the display does not
show , press either the or key until
the clock mode ( ) is displayed.
symbol will appear.
or key.
or key
key during clock setting
RANDOM
or key
or key
PAGE 3
all of them at once,
master disable function.
, go to the clock mode ( ) by using the
X symbol will appear to
X symbol will
PAGE 11