Related Manuals for InFocus sc-FF-84
Summary of Contents for InFocus sc-FF-84
- Page 1 For FiXED FraME scrEEn sc-FF-84 sc-FF-100 sc-FF-120 sc-FFW-94 sc-FFW-113 sc-FFW-130 InFocus Corporation 13190 SW 68th Parkway Suite 200 Portland, OR 97223 www.InFocus.com...
-
Page 2: Frame Assembly
larGE Wall BracKEt (47" lonG) Quantities vary by screen size: Screens 80" and smaller viewing width = 1 QuantitY incluDED __________ Screens over 80" to 96" viewing width = 2 Screens over 96" viewing width = 3 installation screws not included sMall Wall BracKEt (8"... -
Page 3: Installation
METHOD 1 (SCREENS 80" AND SMALLER IN INSTALLATION VIEWING WIDTH) There are three methods of installation based on the size of the screen and type of viewing surface. Measure the width of the viewing area of your screen and refer to the appropriate method of installation below. - Page 4 METHOD 2 (SCREENS OVER 80" UP TO 96" IN VIEWING WIDTH) 1. Use the supplied #10 screws to attach four frame 5. Position the screen with the attached surface brackets to the back of the frame as shown in onto the top wall bracket as shown in Figure 7. Figure 5.
- Page 5 CLEANING surface can be cleaned as follows: Using a white clean cloth (100% cotton preferred) that is dampened with clear water, gently wipe the area in one direction. Do not use a circular motion. Using a dry 100% cotton cloth, wipe dry after each cleaning session. To clean a stubborn stain or a sticky surface, use denatured alcohol (methanol or methyl alcohol) following the same procedure as for water.
- Page 6 LIMITED ONE YEAR WARRANTY ON DA-LITE PRESENTATION PRODUCTS Da-Lite Screen Company, Inc. warrants its products to the original purchaser only, to be free from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original purchaser provided they are properly operated according to Da-Lite’s instructions and are not damaged due to improper handling or treatment after shipment from the factory.