Alarm - Hitachi Cable WirelessIP 5000 User Manual

Chapter 6
Other settings

Alarm

Setting the alarm function
1 To change the alarm function settings, from the setting menu,
Select "3. Alarm" using the
then press the
2 Up to 3 alarm settings can be registered..
Select "1. Alarm 1", "2. Alarm 2", or "3. Alarm 3" using the
key,
then press the
3 Alarm setting information is displayed.
・Setup
・Time
・Ring
・Repeat
To change a setting, Using the
For the setup, select "On" or "Off".
Enter the alarm time.
For "Ring", select from "Bell 1" through "Bell 5", Vib.", or "Silent".
For frequency, select from "Once", "Everyday", "Mon-Fri", or "Mon-Sat".
Finally, save with the
keys of the
key.
key.
key, select "Edit."
If you select "Off", the setting can be saved, but the alarm does not operate.
key.
key,
keys of the
- 6-9 -