Related Manuals for SpeakerCraft SC Pro Commercial 8
Summary of Contents for SpeakerCraft SC Pro Commercial 8
- Page 1 OWNER’S MANUAL SC Pro Commercial In-Ceiling Speaker System SC Pro Commercial 8 | SC Pro Commercial 6 | SC Pro Commercial 4 | SC Pro Commercial Sub...
-
Page 2: Speaker Components
SPEAKER COMPONENTS Please use Diagram 1 below to identify speaker components mentioned throughout this manual. DIAGRAM 1 Knockout J-Box Seismic Mounting Tab Back Can Mounting Foot WavePlane ™ Tweeter Baffle Transformer Tap Selector J-Box Lid Terminal Connector Strip... -
Page 3: Installation And Wiring
Features an 8" polypropylene cone woofer, 1" pivoting dome tweeter, WavePlane™ tweeter baffle, wide-coverage, ported design, and a built-in multi-tap transformer, capable of handling 8 ohm or 70V/100V systems. The SC Pro Commercial 8 is ideal for large commercial applications. - Page 4 DIAGRAM 3 Transformer Tap Selector SC Pro Commercial 8, SC Pro Commercial 6, SC Pro Commercial Sub 8 SC Pro Commercial 4 7. Speaker Wire Connections a. Wiring Options. All wire connections are made inside the J-Box at the top of the speaker back can. (See Diagram 4) There are three ways to connect wires to the speaker: • Using stripped wires - Pull insulating sleeve off wire ends to reveal stripped wire for wire nut connection.
- Page 5 • When Painting the Grille - Remove the grille from the speaker. Spray painting is highly recommended, as the grille holes may clog if paint is rolled or brushed. SpeakerCraft recommends only light spray painting using 5 parts thinning agent to 1 part paint. When finished, replace the grille material inside the grille and insert the grille back into the speaker.
-
Page 6: Specifications
SPECIFICATIONS SC Pro Commercial 8 SC Pro Commercial 6 Speaker Type: Background / Foreground Background / Foreground In-Ceiling Speakers In-Ceiling Speakers Tweeter: 1" pivoting dome 1" pivoting dome 8" polypropylene cone ⁄ " polypropylene cone Woofer: Transformer Taps: 70V: 64W, 32W, 16W, 8W... -
Page 7: Limited Lifetime Warranty
SpeakerCraft or the SpeakerCraft Authorized Dealer will, at its option, repair or replace this product at no additional charge, except as set forth below. If this model is no longer available and can not be repaired effectively, SpeakerCraft, at its sole option, may replace the unit with a current model of equal or greater value. - Page 8 940 Columbia Avenue, Riverside, CA 92507 | USA (800) 448 0976 Fax (951) 787 8747 International +1 951 787 0543 | www.speakercraft.com LIT L13-42455(rev1)