Advertisement
Quick Links
ASSEMBLY & INSTALLATION INSTRUCTIONS
Generations 30" Vanity
9210.030.329
VANITY TOP
9210.130.251 Laminated 31" Marble Top
No additional top required for Newbern
Vanity Top
Thank you for selecting our products...products which have been the benchmarks of fine quality for over 100 years. To
help insure that the installation process will proceed smoothly, please read these instructions carefully before you begin.
Also, review the recommended tools and materials list; carefully unpack and examine your new plumbing fixture.
To maintain the beauty of the finish, avoid placing the furniture in direct sunlight, as sunlight causes fading. Also avoid
extreme changes in temperature by arranging furniture away from radiators, heat and air vents, and air conditioning
units. Avoid placing furniture directly under windows.
Recommended Tools & Materials
Adjustable Wrench
Basin Wrench
Tubing Cutter
Roughing-in
Dimensions
33-1/2"
(851mm)
27-1/4"
(692mm)
4-3/4"
(120mm)
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2008
RECOMMENDED SINKS
0615.000 Rattan Undermount Sink
7820.400.020 Newbern Vanity Top
- 4" Centers
7820.800.020 Newbern Vanity Top
- 8" Centers
Channel Locks
Hacksaw
Plumbers' Putty or
Tape
Caulking
Measure
30"
(762mm)
8"
(203mm)
1-1/4" (32mm)
O.D. WASTE
Pipe Wrench
Putty Knife
NEWBERN SINK
OPTIONAL:
LAMINATED MARBLE
TOP WITH RATTAN
UNDERMOUNT SINK
SUPPLIES AS
REQUIRED
22"
(559mm)
20"
(508mm)
FINISHED
FLOOR
- 1 -
RECOMMENDED FAUCETS
7005.201 Copeland
Center Set Faucet
7005.801 Copeland
Widespread Faucet
Drill
Phillips Screwdriver
Regular Screwdriver
21-1/2"
(546mm)
FINISHED
FLOOR
7 7 0 0 1 1 - 1 0 0
Level
FINISHED
WALL
Advertisement
Related Manuals for American Standard Generations 30" Vanity 9210.030.329
Summary of Contents for American Standard Generations 30" Vanity 9210.030.329
- Page 1 ASSEMBLY & INSTALLATION INSTRUCTIONS Generations 30" Vanity 9210.030.329 VANITY TOP 9210.130.251 Laminated 31" Marble Top No additional top required for Newbern Vanity Top Thank you for selecting our products...products which have been the benchmarks of fine quality for over 100 years. To help insure that the installation process will proceed smoothly, please read these instructions carefully before you begin.
- Page 2 VANITY INSTALLATION Unpack unit carefully, taking care that bottom shelf does not drop and damage front legs (see Figure 2). Provide suitable reinforcement for anchoring the vanity to the wall. Centerline of reinforcement should be 31" up from the floor (see Figure 1). Rough in supply lines and waste per rough-in dimensions.
- Page 3 NEWBERN VANITY SINK 7820.400 AND 7820.800 INSTALLATION onto VANITY Two people recommended for this installation Mount the drain assembly (not included) on the sink. Be certain to apply a bead of sealing putty on the underside of the drain (Part "A") in order to ensure a watertight seal between the sink and drain.
-
Page 4: Replacement Parts List
Care and Cleaning of Vanity Clean the product by using soft, slightly damp cloth. Buff the product by using a soft dry cloth. Avoid using silicone cleaners and waxes. Clean up excess water and spills immediately. Use a blotting rather than a wiping action. Water left over a long period of time will cause white spots in the finish. - Page 5 If inspection of this AS America, Inc. (“American Standard”) plumbing product, within one year after its initial purchase, confirms that it is defective in materials or workmanship, American Standard will repair or, at its option, exchange the product for a similar model.