Download Print this page

HP X131 10G X2 Quickspecs Page 3

Sr, lrm, lr, er and cx4.
Hide thumbs
   

Advertisement

QuickSpecs
Technical Specifications
HP X131 10G X2 SC LR
HP X131 10G X2 SC LR
HP X131 10G X2 SC LR
HP X131 10G X2 SC LR
Transceiver
Transceiver
Transceiver (J8437A)
Transceiver
An X2 form-factor
transceiver that supports
the 10-Gigabit LR
standard, providing 10-
Gigabit connectivity up to
10 km on single-mode
fiber.
Ports
Ports
Ports
Ports
Connectivity
Connectivity
Connectivity
Connectivity
Physical characteristics
Physical characteristics
Physical characteristics
Physical characteristics
Environment
Environment
Environment
Environment
Electrical characteristics
Electrical characteristics
Electrical characteristics
Electrical characteristics
Cabling
Cabling
Cabling
Cabling
Notes
Notes
Notes
Notes
Services
Services
Services
Services
DA - 12987
HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4)
HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4)
HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4)
HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4)
1 SC 10-GbE port (IEEE 802.3ae Type 10GBASE-LR); Duplex: full only
Connector type
Connector type
Connector type
Connector type
Wavelength
Wavelength
Wavelength
Wavelength
Dimensions
Dimensions
Dimensions
Dimensions
Weight
Weight
Weight
Weight
Transceiver form factor
Transceiver form factor
Transceiver form factor
Transceiver form factor
Operating temperature
Operating temperature
Operating temperature
Operating temperature
Operating relative
Operating relative
Operating relative
Operating relative
humidity
humidity
humidity
humidity
Nonoperating/Storage
Nonoperating/Storage
Nonoperating/Storage
Nonoperating/Storage
temperature
temperature
temperature
temperature
Altitude
Altitude
Altitude
Altitude
Power consumption
Power consumption
Power consumption
Power consumption
typical
typical
typical
typical
Power consumption
Power consumption
Power consumption
Power consumption
maximum
maximum
maximum
maximum
Cable type::
Low metal content, single-mode fiber-optic, complying with ITU-T G.652
and ISO/IEC 793-2 Type B1;
Maximum distance:
10 km
Cable length
Cable length
Cable length
Cable length
Fiber type
Fiber type
Fiber type
Fiber type
Conditioning patch cord cables are not supported
For fiber patch cords, use Ultra Physical Contact (UPC) surface
termination/polish. Angled Physical Contact (APC) is not recommended
Refer to the HP website at
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
Worldwide — Version 7 — April 14, 2011
SC
1310 nm
3.48(d) x 1.42(w) x 0.43(h) in. (8.84 x 3.61 x
1.09 cm)
0.35 lb. (0.16 kg)
X2
32ºF to 104ºF (0ºC to 40ºC)
15% to 95%, noncondensing
-40ºF to 185ºF (-40ºC to 85ºC)
up to 10,000 ft. (3 km)
2 W
3 W
2m to 10km with 9/125 ìm single-mode cable
Single Mode
www.hp.com/networking/services
for details on
Page 3

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: