Datel DMS-PS-CM Series Brochure & Specs

85-264Vac or 110-340Vdc
FEATURES
Up to 80% efficient single, dual, and triple-
n
output model
Individual, fully-isolated outputs:
n
3000Vac on main
4000V double-isolation on auxiliaries
Available with +5V, +12V, and +24V outputs
n
Low noise: 40mVp-pk on main, 8mVp-pk on
n
auxiliaries; Ideal for sensitive instrumentation
Universal input: 85-264Vac @ 47-63Hz or
n
110-340Vdc
Choice of 5, 10, or 16W models for minimal
n
system power-consumption
Standby power consumption as low as 0.6W
n
Short-circuit protection on all outputs;
n
OVP on main output
Built-in ac mains fuse & 'Power On' indicator
n
5W models operate up to 5 LED-display DPM's
n
Vibration-resistant, chassis-mount
n
modular packages
EMC compliant; UL/CSA recognized
n
Low cost!
n
TB4
AC(L)
AC(N)
85-264V
50/60Hz
or
110-340Vdc
FG
Universal Input
Murata Power Solution's DMS-PS-CM Series
of high-efficiency, chassis mount AC/DC
power supplies feature low noise (40mV on
main, 8mV on auxiliaries), fully-isolated +24,
+12V, and +5V outputs, making them perfect
for powering today's complex instrumenta-
tion. A high-current main output is isolated
from the AC line by 3000Vac. In dual- and
triple-output models, the low-current auxiliary
outputs are isolated from the main output by
1000Vdc, and from each other by 2000Vdc,
effectively providing double isolation from the
AC line! This unprecedented isolation elimi-
nates ground loop problems in complex,
multiple-instrument applications.
Full-load efficiencies of up to 80% and
output-power ratings of 5, 10 or 16 Watts,
combine to ensure minimal ac power con-
sumption. For intermittent use or low-power
applications, the 5-Watt model's no-load
quiescent consumption with a nominal
120Vac input is a mere 0.6 Watts---that's
nearly seven times less than a standard 4W
F1
AC/DC Converter
1A/250V
Drive
Circuitry
Figure 1. DMS-PS-CM Series Simplified Schematic
www.murata-ps.com
High Efficiency, AC/DC Instrumentation Power
Supplies with Individually Isolated Outputs
DC/DC
Converter
+
–
DC/DC
Converter
+
–
*
Not used on single-output models
**
Used only on dual and triple-output models
Figure 1. Simplified Schematic
DMS-PS-CM Series
C
US E156931
®
night light! These low cost, high-efficiency
power supplies can significantly reduce
long-term electricity costs in low (<5Watts)
to medium (<16Watts) power applications.
All DMS-PSX-CM power supplies fea-
ture universal inputs of 85-264Vac 50/60Hz,
built-in line fuses, and on-board 'Power On'
LED indicators. At full rated load, hold-up
time is typically 20ms at 120Vac, and 80ms
at 230Vac. All outputs provide indefinite
short-circuit protection and, for added reli-
ability, the main high-current output also
includes overvoltage protection. A rugged,
vibration-proof, chassis mount package
incorporates large, shock-resistant terminal
blocks for all I/O connections.
Multiple outputs, low noise, low cost,
high efficiency, double isolation, and rugged
construction combine to make DMS-PSX-
CM Series AC/DC power supplies the
ideal choice for powering today's sensitive
instrumentation, and any electronic device
that requires a reliable dc voltage!
LDO
**
Regulator
+
IN OUT
+ +
GND
–
LDO
**
Regulator
+
IN OUT
+ +
GND
–
*
+ +
Technical enquiries email: sales@murata-ps.com, tel:
MPM_DMS-PS-CM_B01 Page 1 of 8
TB3
+
V3 (Auxilliary)
–
TB2
+
(Auxilliary)
V2
–
TB1
+
(Main)
V1
–
+1 508 339 3000