Video" Menu - YAMADA DVR-9300HX Manual

To use the factory reset confirm S T A R T by pressing ENTER .
In the subsequent " P e r f o r m F a c t o r y R e s e t " dialogue box go to the
field and press ENTER. Press (
For the subsequent four steps please refer to "Set menu language and
country",Page 19 onwards.
Please note that a new password is retained even after completing
the factory reset.
Country Setup
You select here the country in which the DVD/HDD recorder is operated.
You can extend the list of countries by navigating to the top option by
pressing or to the lowest option by pressing

"VIDEO" menu

Channel Scan
You can start the channel scan here.
Normally the channel scan is carried out on initial setup; please also refer
to "Changing programme space",Page 20.
Adding/deleting channels (Add/Del Channel)
You can reprogram the programme spaces and set the individual channels
here.
The options are described in detail in the "Change programme presets/
edit channels",Page 20 chapter.
Proportion (Screen Format)
: Select this setting to display a film in 16:9 format on a
4 : 3 l e t t e r b o x
traditional TV with 4:3 format. The image is shown with a
black bar at the top and bottom edges.
: Select this setting to display programmes in the normal
4 : 3 P a n S c a n
4:3 format on a 4:3 TV. 16:9 format programmes are
shown full-screen without disturbing bars but the edges
of the image are cut off.
: Select this setting to output to a wide-screen TV in 16:9
1 6 : 9 W i d e
format.
) to cancel the process.
.
S SETUP
ETTINGS IN THE MENU
45