Hasbro Big Jump Challenge 77113/77026 Instruction Manual

TO REASSEMBLE LAUNCHER:
With launcher facing away
from you, hold engine so that
the metal gear is at the top of
the right side. Tilt engine so
that the hook on the launcher
fits into the hole on the en-
gine. Press engine down into
launcher.
3
SETTING UP:
For the Jump Distance Challenge
1
Lay the cardboard mat flat on the floor.
Set up on wood, tile or
linoleum floors for the best
performance of your bikes.
Deep pile carpets can create
an uneven play surface.
Place your launcher directly
3
in front of the jump.
Race for Speed!
Set up a finish line on the floor using string,
or just the threshold between two rooms. You
and a friend (or a bunch of friends) should line
up next to one another, with your launchers at
the ready. See who can beat the others to the
finish line!
Big Jump Challenge
TO ASSEMBLE:
Apply labels as shown.
1
™*
Snap parts together as shown.
2
4
Lock launcher top
in place with the
plastic ring by
placing ring over
tabs and turning it
90 degrees.
Place the ramp on the
2 white end of the mat.
Take turns jumping your bikes
4
as far as you can. Whoever
lands on the highest scoring
section of the mat wins!
Race for Distance!
Line up and launch! Race your bikes to see
who can go the farthest, the fastest!
6+
AGES
77113/77026 Asst.
Place launcher top
back on launcher
so that it is flush
with the body of
the launcher.
Reattach handle by
inserting into hole so
that slots and tabs
match up, and turning
counterclockwise to
lock in place.