1060 PCI Express Half Mini Card for wireless WAN or mSATA solid-state
drive
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 56
•
"1020 Bottom slot cover" on page 57
Removal steps of PCI Express Half Mini Card for wireless WAN
In step
1
, unplug the connectors by using the antenna RF connector removal tool or pick the connectors
with your fingers and gently unplug them in the direction of the arrows.
When installing: Plug the blue cable into the connector marked MAIN, and the red cable into the connector
marked AUX on the card.
Step
Screw (quantity)
2
M2 × 3 mm, wafer-head, nylon-coated (1)
Torque
Color
Black
0.181 Nm
(1.85 kgfcm)
.
Chapter 9
Removing or replacing a FRU
63