American Standard Colony Pedestal Sink 0113.404 Specifications

COLONY™ 24" PEDESTAL SINK
• Vitreous china lavatory and pedestal
• Front overflow
• Fitting ledge with generous shelf area
• Supplied with mounting kit
Shown with 2385.060 Reliant faucet
(not included)
❏ 0113.411 Faucet holes on 4" (102mm) centers
(Illustrated)
❏
0113.811 Faucet holes on 8" (203mm) centers
Nominal Dimensions:
23-3/4" x 20" x 35-1/4"
(603 x 508 x 895mm)
Separate Components:
❏
0113.404 Pedestal top 4" (102mm) centers
❏ 0113.808 Pedestal top 8" (203mm) centers
❏ 731100-400 Pedestal only
Bowl sizes:
18-1/2" (470mm) wide
12-1/2" (318mm) front to back
5-1/2" (127mm) deep
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures
To Be Specified:
❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Silver
❏ Faucet:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
© 2008 AS America Inc.
20-3/4"
5" (127mm) REF. (527mm)
PEDESTAL/WALL
CLEARANCE
5-1/2"
(140mm)
PEDESTAL ANCHORING
SCREW HOLES
3/8" (10mm) DIA.
PEDESTAL
BASE
23-3/4"
(603mm)
3/8" (10mm) DIA.
ANCHOR SCREW
(406mm)
HOLES ON
S9 WALL-MT
16" (406mm) CTRS
HANGER
5-1/2"
8" (140mm)
(203mm)
5/16" (8mm) X 1-1/16" (27mm)
ANCHOR SCREW HANGER
MTG HOLES (2) ON
4-1/2" (114mm) CTRS
*
21"
(533mm)
FINISHED
FLOOR
NOTES:
* DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND "P" TRAP ARE
SUGGESTED.
▼ PEDESTAL ANCHORING SCREWS NOT INCLUDED.
■ SUITABLE FOR REINFORCEMENT ONLY, ACTUAL DIMENSIONS MUST
BE TAKEN FROM FIXTURE.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
J14
COLONY™ 24"
PEDESTAL SINK
VITREOUS CHINA
FINISHED
3-3/4"
WALL
(95mm)
4"
(102mm)
8"
(203mm)
20"
(508mm)
1-3/4" DIA.
STD. DRAIN
OUTLET
16"
1-1/4" 4-1/4"
(32mm) (108mm)
8" (203mm)
SUPPLIES AS
35-1/4"
REQUIRED
(895mm)
1-1/4" O.D. 28-1/4"
(718mm)
WASTE
*
1-1/4" O.D. 23"
(584mm)
TAILPIECE
ANCHOR SCREW
HOLES (2) 3/8"
(10mm) DIA. ON
4-3/4" (121mm)
CTRS
8"
(203mm)
Revised 2/08
DRAIN
CHASE
OPEN
TO
FLOOR