Table of Contents 3 Introduction 4 Speaker Placement 5 Mounting Options 6 Speaker Connections Connection Guide Configuring your Receiver or Processor 7 Troubleshooting 8 Specifications 2 TABLE OF CONTENTS Declaration of Conformity We, Harman Consumer International 2, Route de Tours 72500 Château-du-Loir, FRANCE declare in own responsibility, that the product described in this...
In addition, a few minutes spent learning the functions of understanding the setup options will enable you to take advantage of all the power and refinement the HKS 3 is able to deliver. If you have any questions about this product, its installation or operation, please contact your dealer, the best local source of information.
Speaker Placement Color-Coding System The HKS 3 and the HKTS 7 use the channel color-coding system established by the Con- sumer Electronics Association to make setting up your home theater speaker system as easy as possible. Your system includes a set of colored stickers that may be placed near the speaker ter- minals of each of the satellite speakers.
Mounting Options Wall-Mounting Unscrew the bolt that attaches the black shelf stand to the bottom of the speaker. Store the stand and bolt in a safe place in case they are needed for a future installation. Remove Stand 15mm or 1/2" Wall Plate Mount the wall-bracket attachment plate on the wall in the desired location.
Front-, Surround- or Surround Back-Channel Receiver/Amplifier Output 6 SPEAKER CONNECTIONS Although the HKS 3 speakers may be placed in the front, side surround or surround back posi- tions, the speaker wires provided with the sys- tem have been color-coded brown for the sur- round back left speaker and tan for the surround back right speaker.
Troubleshooting If there is no sound from any of the speakers: If there is no sound coming from one speaker: If the system plays at low volumes but shuts off as volume is increased: If there is low (or no) bass output: If there is no sound from the surround speakers:...
Specifications Satellites Recommended Power 10 – 80 Watts Impedance 8 Ohms nominal Frequency Response 110Hz – 20kHz (–6dB) Sensitivity 86dB @ 1 Watt/1 meter Tweeter One 1/2" dome, video-shielded Midrange One 3" driver, video-shielded Dimensions (H x W x D) 167mm x 100mm x 92mm Weight 0.6kg...