Maintain tools with care. Inspect Lathe Stand periodically and, if damaged, have it repaired by an authorized technician. use the right Lathe Stand for the job. Do not attempt to force a small Lathe Stand to do the work of a larger industrial tool. There are certain ap-...
Page 3
When unpacking, check to make sure the parts listed on page 5 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual.
When mounting a lathe onto the stand, first make sure the mounting holes on the stand correspond with the mounting holes on the lathe. One person should hold the lathe so that the mounting holes line up, while the other person puts one of the bolt, washer, nut combinations (not includ- ed) through one of the holes in an Adapter plate (1), and tighten by hand.
PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. SKU 46407 Maintenance parts List part...