Uniform Wares 351/br-01 User Manual

OFFICE ADDRESS:
Studio 12A,
Broadway Market Mews,
London E8 4TS, England
TELEPHONE:
+44 ( 0 ) 20 7923 7827
EMAIL:
info@uniformwares.com
press@uniformwares.com
wholesale@uniformwares
WEBSITE:
www.uniformwares.com

User Manual

351 Series
351 br-01
/
setting the time
a
1 Adjust the watch crown ( ) situated on the side of the
case at the 3 o'clock position out from the Operating
Position to Set Position by pulling outwards where the
crown is fully extended
at the second adjustment click.
2 Turn the crown anti-clockwise to the desired time, do
not turn the crown clockwise.
3 When the time is set, push the crown back to the
Operating Position.
Please note: Whilst the crown is in the Set Position the
watch is not moisture resistant.
setting the date
1 Pull the watch crown out from the Operating Position to
p1
set Position 1 [ ] where the crown (
the first adjustment click.
p1
2 In Set Position 1 [ ] turn the crown clockwise until the
correct date is displayed
3 When the date is set, push the crown back to the
Operating Position. The watch will resume.
Please note: The date should be set before 12 noon so that
the calendar indicator changes in sync at twelve midnight
and not 12 noon.
Please note: Whilst the crown is in the Set Position 1 [
p2
or 2 [ ] the watch is not moisture resistant.
COMPANY DETAILS
Uniform Wares Limited
Company Number 7187255
351 br-02
/
setting the time and day
1 Adjust the watch crown (
case at the 3 o'clock position out from the Operating
Position to Set Position 2 [
the crown is fully extended at the second adjustment
click, the second hand will stop clicking.
2 Turn the crown anti-clockwise to the desired time, do
not turn the crown clockwise.
3 When the time is set, push the crown back to the
Operating Position.
Please note: Whilst the crown is in the Set Position the
watch is not moisture resistant.
setting the date
1 Pull the watch crown out from the Operating Position to
a
) is half extended at set Position 1 [
the first adjustment click.
2 Turn the crown clockwise to set the date and anti-
clockwise to display the desired day. Please note: Your
watch has a dual language day display but will only
function according to the language you have set.
3 When the date and day are set, push the crown back
to the Operating Position. The second hand will resume
ticking.
p1
]
a
) situated on the side of the
p2
] by pulling outwards where
p1 a
] where the crown ( ) is half extended at