Related Manuals for Lindy 42896
Summary of Contents for Lindy 42896
- Page 1 USB 2.0 Card Reader Panels User Manual English LINDY No. 42896 5.25” Card Reader Panel LINDY No. 42897 3.5” Card Reader Panel www.lindy.com © LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (Feb 2005)
-
Page 2: Installation Instructions
Installation Instructions 5.25” Card Reader Panel (No. 42896) Software Installation Users of Windows XP/ME/2000(SP3) DO NOT need to install drivers. Windows will automatically provide a USB 2.0 device driver for the card reader. Win 98SE/2000 users need to install the software using the supplied CD. Please install the software before fitting the card reader into your computer. - Page 3 Step 2 Switch off your computer, and unplug from the mains. Remove the case cover and install the card reader assembly into a spare 5.25“ bay in your computer Step 3 Secure the card reader using the supplied screws Step 4 Next, connect the USB cables from the card reader circuit board and USB extension port circuit board to a USB pin header on your motherboard or USB add-on card.
- Page 4 Installation Instructions 3.5” Card Reader Panel (No. 42987) Software Installation Win 98SE/ME/2000/XP users need to install the software using the supplied CD. Please install the software before fitting the card reader in your computer. Insert the CD and follow the on screen instructions as below: Step 1 After the Welcome menu appears click Install device to begin.
- Page 5 Hardware Installation Note: We recommend you use anti-static precautions when installing the card reader Step 1 Connect the supplied USB internal cable to the connector on the Card Reader Step 2 Switch off your computer, and unplug from the mains. Remove the case cover and install the card reader assembly into a spare 3.5"...
-
Page 6: Using The Card Reader
Using the Card Reader The first time you power up your computer after you have installed the Card Reader, Windows will automatically detect and install the relevant drivers. Once this process is complete you can begin using your Card Reader! Windows identifies each different memory card slot in the Card Reader as a removable drive. - Page 7 Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation For Home and Office Use Tested to comply with FCC Standards LINDY No. 42896; 42897...