With the sampler of BPM Studio
you can load shor t jingles,
loops, and sound effects, and
then replay them by the click of
a button. The maximum length
of such a sample in BPM Studio
LE is 20 seconds. As in the two
players the playback will start
exactly when the sampler button
is clicked. This is achieved by
utilizing very fast Direct Sound
drivers, or the Kernel Driver
developed by ALCATech. Learn now, how you can
load and play samples with the sample player.
1.)
Look up a jingle in your Play Lists. (You can
also use a regular title, merely 20 seconds
will be loaded in the sampler though.
2.)
Drag the title onto the desired button of the
sampler, e.g.
mouse pointer over the title, push the left
mouse button and hold it down, while you
point at the desired button with the pointer
now. The n let go. The sampler LED will
shortly change its color from green to red,
thus indicating that the sample has been
loaded. When the sample is loaded
completely, the digit on the Sampler Button
will become brighter, this making it easier
to determine which buttons have samples
assigned.
. To do so, place your
You can also load a
sample directly from the
hard drive, via the pop up
menu. To do so point on
the desired button, and
click the right mouse
button. In the appearing
menu select "Load", and
select the desired file in
the Explorer window
popping up. Confirm with
OK.
3.)
Now click on the sampler button. The sample
will be played. For the duration of the sample
playback can be stopped, by clicking the
same button again (not in scratch mode).
You can also start the sample with the
number block on your PCs keyboard or with
the sample block of the remote control unit
(not RCP-1001). These buttons work parallel
Through the pop up menu two different playback
modes can be selected for the sample player.
4.8.1. Single Play:
When this option is activated (a little check mark
can be seen in front of the entry) a possible still
playing other sample will b stopped. Only ONE
sample will be played at a time.
First Steps
Need help?
Do you have a question about the BPM STUDIO 4 PRO and is the answer not in the manual?