ALCATECH BPM STUDIO 4 PRO User Manual page 93

First Steps
Assigning a fade to a title
When all adjustments have been made in the
cross fader, the prepared fade needs to be
assigned to the according title.
This is also accomplished by
Drag&Drop. To do so, click on
an empty spot within the cross
fader display.
Drag the adjusted fade to the title in the play list,
which it is to be assigned to. The mouse pointer
will have a little cross fader symbol accompanying
it:
Once the fade is assigned, this title will be marked
with a little rectangle in front of the time column
of the play list:
All following titles in the play list, will now have
the same fade assigned, until another fade is
assigned to one of the following titles. If an already
assigned fade needs to be modified, the modified
fade needs to be reassigned via Drag&Drop to
confirm. This avoids unwanted modifications on
previously assigned fades.
The Automatic-Mode will be switched on and off
with . Only when automatic-mode is active,
will the assigned fades be applied.
All functions will be explained extensively in the
Cross Fader Chapter.