Creating Fades Between Titles - ALCATECH BPM STUDIO 4 PRO User Manual

The Cross-Fader enables automatic fades
between the two players. Every single title of the
play list can have a different fade assigned. Thus
the fade can be adjusted exactly to the particular
title.
1.) Screen the end of the title to be faded, and
select a point from which on you wish to start
fading out. Before doing so, switch the time
indicator to REMAIN so you can observe
the remaining playtime of the title.
2.) Adopt the remaining playtime of the title into
the cross fader as fade
time. To do so, adjust the
FADE TIME control
accordingly.
3.) Now pick up the end of the
level curve of the title to be
faded, by clicking the left
mouse button on it.
The mouse pointer changes into
a bi-directional arrow.
Move the end of the curve into
the lower right hand corner of the
cross fader display.
Now the last seconds of the title to be faded will
be displayed in the cross fader's display. The time
will also be displayed.
The title will be faded out in accordance with the
adjusted level curve. If this curve is set like in this
picture, the cross fader will start fading out slowly
at half of the set fade time.
By moving the start point of the fade curve you
can adjust the time, in which the title will be faded
out.
If you move the point all the way to
the right for example, then the title
will be played with the full volume
all the way to the end.
If the start point of the curve is set
all the way to the left, a slow, and
continuos decrease of volume until
the end of the title will be applied.
But also any other desired fade pattern can be
adjusted by Drag&Drop.
First Steps