Software Installation - ALCATECH BPM STUDIO 4 PRO User Manual

Installation
1.03. Supply
Please make sure that following parts are
present:
1. BPM Studio Pro CD
2. Dongle (Hardware Copy Protection for
printer port LPT1 (or USB Port, optionally)
3. Manual
4. Registering post card
5. RC unit with, depending on box sticker, with
- Power supply unit
- serial cable

2.1. Software Installation

This program needs to be installed to your hard
drive from your CD. It can not be executed directly
from CD. Whenever working with BPM Studio, the
supplied dongle needs to be installed to your
computers printer port LPT1 (or USB Port)
If you are installing an upgrade to version
4, you must install into the original
directory, if you want to further use the
file archive and user administration
settings. Please refer to paragraph 10 of
this chapter.
1.) Plug the supplied dongle into the printer port
LPT1 of your PC. (If you have
already installed a printer on this port, simply link
your dongle between printer cable and your PC's
printer port.)
2.) If you have purchased BPM Studio together
with a 19" control unit, connect it to a serial port,
(COM1, COM2), using the supplied serial cable.
Also connect your unit with the power supply unit
to a wall outlet. Read also 2.2., Connecting the
control unit
3.) Insert your installation CD into your CD-ROM
drive.
4.) If your PC has auto notify enabled, the
installation program will now be started. If this
isn't the case, choose run in your Windows start
menu, and enter: "D:\setup", D representing your
CD-ROM drives drive letter.
5.) Now the setup for the main application,
additional modules, and the online manuals will
start.
Choose install BPM Studio to start the installation.
6.) Clicking [YES] will confirm the installation. You
can still abort at this point. If you confirm,
installation files will be copied to your hard drive.
7.) Now setup will prompt you to ensure that no
other applications are running during the
installation process. At this point too, you still have
the option to abort the installation, by clicking on
[CANCEL]