Server Components - ALCATECH BPM STUDIO 4 PRO User Manual

3.19.9.

Server components

Further informations about
this feature can be found in
the chapter BPM Studio
Server Components.
The server components of
BPM Studio offer functions
that allow to remotely control
the program via Web-
Browser, or Telnet. On this
register tab the
impor tant parameters for
both servers are defined. We
recommend maintaining the
preset settings, as long as
they do not cause conflicts
with other PCs or Servers in
the network.
Telnet Port:
Here the port number for the Telnet server is
defined. Default is 23
HTTP Port:
Here the port number for the HTTP Server is
defined. Default is 80. If the server is active,
access to the PC with a web browser is possible.
This is done, in the best case scenario, by
entering http:// -followed by the IP address of the
computer.
If access is to be gained on the same computer,
on which the program is installed, you can enter
"localhost" instead of the IP address.
HTTP Doc path:
The HTTP server will make this folder as main
directory publicly available. It can contain
proprietary information, e.g. web pages with
control functions for BPM Studio
most
HTTP Default Doc:
Define the file that will be displayed as start page
if the user enters merely the IP address of the
computer into his browser, without specifying a
particular file.
If this checkbox is selected, both servers will be
activated and BPM Studio is accessible, and can
be controlled from every PC connected to the
network. Provided appropriate measurements
have not been taken against this.
Program Options