Remote Control - ALCATECH BPM STUDIO 4 PRO User Manual

Program Options

3.19.7. Remote Control

Configuring external control
units
On this register tab the
connected control units will be
adjusted to your
Depending on how deployed,
(local PC / DJ Case, portable PC,
or notebook) hardware outfit
(number of sound cards,
hardware audio outfit), and type
of remote control unit, different
functions can be assigned to the
sliders, and multi purpose
buttons. The level of adjustability
depends on the type of the
connected remote control unit.
Additional information can be
found in the chapters of each
particular unit.
Connecting 2 remote control
units:
BPM Studio PRO can be
operated with two remote control
units simultaneously. Thus, the
same system can be accessed
from two different rooms. For
each control unit separate
options are available, like COM port, etc. Of
course very control unit needs it's own serial port.
The two tabs to the lower left you can select
options for control units 1 and 2:
Available control units can freely be combined
with each other. Although, under cer tain
circumstances, restrictions can arise from the fact
that the sliders on the control units can not be
automatically used.
needs.
When using two control units whit sliders, one of
them must always be dedicated as master
, the sliders of the other unit will stay
inactive. When combining a unit with sliders with
a unit with pitch wheels, only sliders will work.
The pitch wheels of the other unit will be disabled.
When combining two units with pitch wheels, no
restrictions apply, therefore this solution should
be preferred.
RC Active
Should always be enabled at the connected
remote control unit. If so, the program will check
on star t up if the unit is connected, and
operational.