ALCATECH BPM STUDIO 4 PRO User Manual page 71

Program Options
Following CD Recorders are currently capable
to read and write CD-Text*:
Teac 56S/58S later than Firmware 1.0j
(SCSI)
Plexwriter 4220 later than Firmaware 1.02
(SCSI)
Plexwriter 8220 (SCSI)
Ricoh 7040 later than Firmware 1.20 (SCSI
& ATAPI)
Ricoh 7060 later than Firmware 1.20 (SCSI
& ATAPI)
Sony 948S later than Firmware 1.0h (SCSI)
Sony CDX 100 / 110 / 120 / 130 / 140 / 145
HP 8100 / 8110 / 8200 / 8210 / 9100 / 9110
(Same vendor as Sony)
To find regular CD players capable of reading CD-
Text, visit your local consumer electronics store.
Record on Rewriteable Discs
The Recorder supports writing on CD-RWs. Media
that can be reused.
Record with Burn Proof
Burn Proof is a procedure developed by Sanyo®
in which throughout the whole process of burning
the Recorder's internal buffer is monitored. When
system performance becomes slow, or even
critical, the drive notices that a buffer underrun is
unavoidable – and stops the burning procedure
at a suitable location. This gives the buffer time
to reload, the data is compared and synchronized,
and the writing process continues right after
where it stopped. This averts the media to become
unusable, if the data throughput should be
interrupted again.
Import Sessions
Sessions already present on the CD will be
imported, the CD may not be finished though.
Select this option if you want to write more data
on a multi session CD. Important! When writing
on a multi session CD without activated import,
all previous sessions will be destroyed.
CD-ROM/XA
The CD-ROM/XA is a mixture of the specifications
for CD-I, CD-ROM mode 2, and the current format
for data CDs. Deactivate this option if you are
having problems reading in the CDs created with
BPM Studio. Some older CD-ROM drives do not
support this format. When writing multi session
CDs, this format is a requirement in most
recorders.
Close Disc
Finalizes the CD after the burn procedure. Older
CD-ROM drives can not read Data-CDs if they
are not finalized. Audio CDs will always be
finalized in general, since here it is not possible
to write on the CD in several sessions.
Burn Proof
Activates the burn proof function of the recorder.
(if any) Buffer underrun errors will be averted, and
the burn process will be faster.
Eject Disc from Recorder
If this option is selected, the tray of the drive will
automatically be opened when the burning
process is complete.
Test Mode
When in test mode, writing will only be simulated.
All functions of a "real" burn will be performed,
with the exception that the laser is switched of.
Thus the media will not be changed or damaged.
This mode is used for troubleshooting, to avoid
to many plain media will turn out as scrap. Keep
the function "Eject Disc from Recorder" activated,
since many Recorders only allow another
recording on the same media if it has been
removed, put back into the device, and scanned
back in anew.
* no Guarantee