Bpm Studio Server Components - ALCATECH BPM STUDIO 4 PRO User Manual

This button defines the justification of
the footer. (Aligned left, aligned
center, aligned right)
Additionally to the regular text, 4 four
variables fields are available, which
will be updated while printing
{PAGES} automatically adds page numbers
{NUMPAGES} adds the number of pages
{DATE} Adds the current date
{TIME} Adds current time
Show Footer Line
Prints a line between the page content and the
footer. In the following fields you can define color
and width of this line.
The BPM Studio server components are a
universal interface to control the most software
functions remotely. This functionality has been
developed mainly to be able to cross platform with
other programs. Since the interface is based on
open standards though, control is available via
standard protocols like HTTP or Telnet. This
enables you to control different workstations (PCs
with BPM Studio installed) that are located in
different rooms. If the server component is
activated (Register tab "Server" in Program
Options) BPM Studio will establish an HTTP- and
a Telnet-Server. The HTTP-server port and the
Telnet port are freely configurable. Be aware
though, that when controlling a component over
BPM Print Designer, Server Components
Start printing:
many pages, and copies of the document you
need.
The "Close' button will lead you back to the export
list window, in case you wish to
make changes there.
If possible avoid printing and audio
playback at the same time. If the selected
printer should not be ready when the
printout is started, the windows time-out
may cause the playback to stop, and
interrupt communication with the remote
control unit.
a network the reaction time on a released signal
may be delayed.
Both servers make many important functions
available via a command prompt or also as a URL.
Complete documentation is provided on the BPM
Studio Webser ver at http://localhost:port/
cmds.html
Please have understanding for the fact that only
limited support is available when implementing
this interface, especially in ver y specific
implementation cases.
The "PRINT" key starts
the print out. Before this
though, you can enter how