Creating Daten-Cds - ALCATECH BPM STUDIO 4 PRO User Manual

CD Player / CD Writer
The following status windows keeps you informed
about the whole writing process
After successfully writing the CD, the drives slide
will open, and you can take out .the CD
3.15.9. Creating data CDs
Select this mode if you would like to copy MP3
files already present on your system to a CD, that
can later on be played on a PC with a standard
CD ROM drive installed. Thus, you can back up
files easily, or transfer them to another computer.
The maximum available drive capacity depends
on the used media, and usually varies between
650 to 700 MB.
Start a new CD project by clicking the
button. In the following dialog box select 'Data-
CD"
The selected mode will be indicated in the status
bar to the left.
Now insert the media into the Recorder. The CD
status window to the right below the status bar
indicates, as when creating audio
CDs, the contents of the CD, and
the Recorder.
Now you can load selected titles, complete Play
Lists into the Recorder.
This can be done in various ways:
1.) Drag & Drop from the from Play Lists,
file archive, or Play List archive.
2.) Via the clipboard, with "copy"
and "paste" (Ctrl – C / Ctrl – V)
3.) With the button you can load
any Play List present on the hard drive.
4.) With the button you can selected
tracks directly from your hard drive.
The status bar to the left shows how much storage
space on the media is already in use. Additionally
a status bar to the right below the track list
indicates the required disk space. (Pay attention
not to exceed the media's maximum play length
when assembling the title list. If you do, an
according message will warn you before the write
process.)
Please make sure that with BPM Studio
only work you authored, or work of which
you are explicitly allowed by author or
someone in lieu, will be copied. Otherwise
you might commit the offense of copyright
fraud, which is a federal felony, or be held
liable by the author, or designated people
in lieu of.